Noisy, Squeeks, Bearings Bad

ApplianceSpeed Queen Dryer

Model

Level of DifficultyA Bit Difficult

Time to do repair1- 2 hours

Age of Appliance5 - 10 years

Tools Pliers
Screw drivers
Socket set

Gary From Dousman, WI

Feb 22, 2009

1 out of 2 people found this instruction helpful

Identified Problem by using silicone spray on drum bearing wheels, when noise stopped I knew bearings were bad. Removed drum per PartsSelect diagram of my dryer then removed wheels, and bearing shaft.
Will need a snap ring pliers with small holes to remove snap rings. I ordered new shafts, washers,snap rings,drum wheels, and belt. Installing belt use two hands and make sure tension bar is correct review belt locations before repair. Also cleaned and vacumned inside of Dryer. Remember to unplug, I did not and when door was removed I caused a short that blew fuse, lucky that I did not damage dryer in process. Working well now with no nose.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Thrust Washer

Part Number: PS333174

$4.46
In Stock

Retaining Ring (Now subbed to Retaining Ring)

Part Number: PS2025108

$2.70
In Stock

Drum Support Roller - for square ported models (Now subbed to Drum Support Roller)

Part Number: PS2039408

$7.64
In Stock

Multi Rib Belt - 93-3/8" (Now subbed to Multi-Rib Belt)

Part Number: PS2041323

$11.38
In Stock

Roller Bracket and Shaft Assembly (Now subbed to Roller Bracket and Shaft Assembly)

Part Number: PS2041342

$19.23
In Stock