SOmehow the upper rack end cap went missing. I needed to replace the cap so the rack would not pull all the way out and fall down.

ApplianceGeneral Electric Dishwasher


Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of Appliance5 - 10 years

Tools Pliers

BRIAN From Keller, TX

Sep 04, 2007

0 out of 3 people found this instruction helpful

I used needle nose pliers. I bent the stainless steel guide arm out so that I could insert the end cap. Once the end cap was installed I used the same needle nose pliers to "pinch" the guide arm back tight around the end cap. The end cap had premanufactured "notches" to hold the end cap in place once the guide arms are pinched down.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

USE GEH WD12X10304 (Now subbed to RACK SLIDE END CAP)

Part Number: PS2370502

In Stock