Washer would not agitate or spin

ApplianceKitchenAid Washer

Model

Level of DifficultyA Bit Difficult

Time to do repair30 - 60 mins

Age of Appliance5 - 10 years

Tools Pliers
Screw drivers
Socket set

Scott From Indian Harbour Beach, FL

Feb 21, 2009

1 out of 1 people found this instruction helpful

First I removed the center cover of the tub, then removed the bolt that was underneath it.
I then tipped the washer back far enough that it wouldn't fall forward.

Next I removed the two hoses connected to the motor/gearbox assembly.
I then removed three bolts that hold the gearbox/motor assembly to the bottom of the tub and slid it down.
The next step is to separate the gearbox from the motor. To do this I removed the spring clips that hold the water pump to the motor, and then the spring clips that hold the gearbox to the motor.
The broken coupling between motor and the gearbox was then removed and replaced with the new one.
Next, put every thing back together.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Direct Drive Motor Coupling

Part Number: PS1485646

$12.01
In Stock