Leaking from top of main conduit

ApplianceGeneral Electric Dishwasher

ModelZBD1800G

Level of DifficultyEasy

Time to do repair30 - 60 mins

Age of Appliance5 - 10 years

Tools Screw drivers
Wrench(Adjustable)

Tom From Brooklyn, NY

Feb 20, 2009

1 out of 1 people found this instruction helpful

Note: I also purchased the main conduit part (PartSelect #: PS958967).

My repair is pretty much the same as the previous poster from TX. The RING NUT W/GASKET part seems to wear easily on this GE dishwasher.

Disconnected dishwasher from electrical. You have to remove the rear lower brace panel in order to remove the main conduit. The bottom end of the main conduit is clamped to a hose.

Installed the new main conduit and o-ring, screwed RING NUT W/GASKET onto upper end of main conduit. I tightened the ring nut with the wrench to make sure I got a good seal without over tightening.

I had to use a new hose clamp to reattach the lower end of the main conduit.

Reinstalled brace panel, reconnected electric, and tested.

It was an easy fix, the parts did not cost too much. I'm glad I fixed it rather than paying some repairman $$. I purchased an extra RING NUT W/GASKET in case it deteriorates again.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

O RING

Part Number: PS958821

$2.23
In Stock

Ring Nut with Gasket

Part Number: PS958823

$3.00
In Stock