The Belt wore out

ApplianceWhirlpool Dryer


Level of DifficultyReally easy

Time to do repair15 - 30 mins

Age of ApplianceMore than 10 years

Tools Nutdriver
Screw drivers

Joe D. From Rapid River, MI

Sep 03, 2007

0 out of 1 people found this instruction helpful

I removed the screws from the lent trap. Opened the top and front of dryer. Removed drum, sliped the new belt on then replaced the drum and front. The access panel on the bottom was still off from inspecting the belt. The Idler pulley had come off when the old belt gave out. Thanks to the FINE instrutions inclosed with the new part it was easy to reassemble. I rotated the drum and used the screwdriver to get the rear drum seal back in place. I test ran the dryer then put everything back.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Multi Rib Belt - 92-1/4"

Part Number: PS346995

In Stock