Level of DifficultyEasy
Time to do repairLess than 15 mins
Age of ApplianceMore than 10 years
George From Richmond, ME
Feb 14, 2009
1 out of 1 people found this instruction helpful
The original washer arm mount was held with a clip and stainless screw. The replacement was a simpler snap clip, but the shaft was "heavier" plastic. I was doubtful with the snap clip, but I have had no issues in the past two weeks.
Remove the old orignial clip with screw. Remove and SAVE the washer arm retining screw. Look at the orientation of the new clip and shaft. The shaft should be canted to your LEFT so that the washer arm clears the bottom of the rack. Simple snap in install. If you guess wrong at first, simply unclip and reverse. Screw in the washer arm retaining screw. Viola!
|Part Photo||Part Description||Price||Availability
Part Number: PS734018