Oven would not heat - no function from touchpad panel.

ApplianceJenn-Air Range

Model

Level of DifficultyReally easy

Time to do repair30 - 60 mins

Age of Appliance1 - 4 years

Tools Pliers
Screw drivers
Wrench(Adjustable)

John From Hillsboro, IL

Feb 12, 2009

5 out of 7 people found this instruction helpful

First I shut off the power to the stove at the house breaker panel. Next I removed the knobs for the burner controls and removed the two screws holding in each burner switch. Then I removed the two screws on the side of the panel and the four screws on the bottom of the panel. Then the panel could be pulled out to access the clock assembly. Setting the burner switches out of the way, I removed the four screws holding in the clock, unplugged the ribbon cable for the touchpad and removed the clock assembly. Next step was to remove the indicator lights for the burners, The light holders just slide off of the red lenses the stick thru the control panel. The lenses then push out of the panel. At this point the old panel is disconnected and you are ready to install the new panel in reverse order. The process was so easy, my nine year old grandson was able to help me.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Control Panel - Black

Part Number: PS2344892

$237.54
In Stock