The buttons, which select water, Ice and crushed ice, would not switch reliably.

ApplianceGeneral Electric Refrigerator


Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of Appliance5 - 10 years

Tools Screw drivers

Stephen From Richmond, VA

Feb 12, 2009

6 out of 7 people found this instruction helpful

If you sqat down to the dispenser level, under the panel where the buttons are, and look up at the bottom of the panel, you will see 3 small holes. These holes are about 1/8" in diameter, and maybe 2" apart, right under the button panel. If you look carefully, you will see white plastic in the outer two holes. One at a time, insert a small (#0 ?) phillips head screwdriver into the holes which will release a plastic catch that holds the panel in place. Pull the released panel out gently, and on the back side is the circuit board. 3 screws hold it in place to the panel. 3 wiring harness plugs need to be removed. Since they are different sizes, they won't be easily confused. After installing the panel board with the 3 screws and plugs, the panel snaps back into place easily.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Dispenser Board

Part Number: PS783821

In Stock