WASHER WOULD NOT AGITATE ON NORMAL SETTING BUT WORKED FINE IN OTHER SETTINGS

ApplianceWhirlpool Washer

Model

Level of DifficultyReally easy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Nutdriver
Screw drivers

MICHAEL From SALISBURY, MD

Feb 09, 2009

6 out of 7 people found this instruction helpful

REMOVED CONTROL KNOBS FROM FRONT (SMALL ONES PULL OFF LEAVE LARGE ONE IN PLACE FOR NOW). REMOVE 2 SCREWS FROM BACK AND REMOVE 2 NUTDRIVERS SCREWS FROM BACK AND LIFT TOP UP. REMOVE LARGE KNOB INSTRUCTIONS ON TIMER. REMOVE WIRING PLUG AND 2 SCREWS FROM UNDER THE KNOB. PUT NEW TIMER IN PLACE ATTACH WITH SCREWS. PLUG WIRING INTO TIMER. RE INSTALL THE BACK WITH 4 SCREWS. ONCE TOP IN PLACE RE INSTALL THE SMALL KNOBS. JOB COMPLETE.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Direct Drive Timer - 120V 60Hz

Part Number: PS350865

$125.48
In Stock