Belt noise/slipping even after replaceing worn motor assy

ApplianceAmana Dryer

ModelLEA30aw

Level of DifficultyReally easy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Nutdriver

Greg From Virginia Beach, VA

Feb 09, 2009

1 out of 1 people found this instruction helpful

Unplug dryer. Remove lower panel.Remove dryer lent duct. Remove Thermostat fm fan housing. Remove Fan.Remove Fan housing. Remove Motor assy by sliding out, wires lay toward front, allowing room to replace idler pulley and spring. Use lock ring pliers to remove pulley from shaft. Grease pulley/shaft w/high temp grease [I used ultra-hi temp ceramic brake grease-can get in small packets at auto stores].Noise/slippage has all but stopped. Lesson: replace rear rollers and front felt/glides. Belt looseness also caused by worn rear rollers [smaller overall diameter from age]-even though they spin freely

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Idler Pulley Spring (Now subbed to Idler Pulley Spring)

Part Number: PS2052983

$20.14
In Stock

Idler Pulley Wheel with Bearing

Part Number: PS2200898

$4.06
In Stock