Stove-top Burner intermittently shut off and on-wouldn't heat properly

ApplianceAmana Range

Model

Level of DifficultyA Bit Difficult

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Pliers
Screw drivers

George From New Bloomfield, PA

Feb 05, 2009

1 out of 1 people found this instruction helpful

removed old Plug-in block by removing 1 screw and cutting 2 wires. (Screw was so tight and rusty that I had to use vise grips to remove it). Installed new Plug-in block with wire nuts and heat shrink wraps. YOU just have to make sure the wires are seated in the block properly. This job was much easier than I anticipated. The burner works great now!

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Surface Burner Plug-In Block Kit

Part Number: PS340571

$8.71
In Stock