ApplianceGeneral Electric Range
Level of DifficultyReally easy
Time to do repairLess than 15 mins
Age of ApplianceMore than 10 years
4 out of 4 people found this instruction helpful
First I removed the two screws that hold the element in place. I also removed a screw that held one end of a support bracket. I then pulled the element out about 3 inches and disconnected the two wires. Reversing these steps, I finished the element's replacement.I had noticed that the former element was sagging at the front end. I installed the additional clips (not original) on each forward end of the element for additional support.
Were these instructions helpful?
Part Number: PS243701
Part Number: PS249411