Water leaking under washer. Tub to pump hose sprung a leak.

ApplianceMaytag Washer

ModelMAV6200AWW

Level of DifficultyReally easy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Pliers
Nutdriver
Screw drivers

Richard From Cedar Park, TX

Jan 29, 2009

6 out of 6 people found this instruction helpful

There are two clips that hold the top of the washer down. Releasing these clips allows you to lift the top; it is hinged at the back. Then remove two screws holding the front panel and remove the front panel. The tub to pump hose is easily accessible. It is held in place by a hose clamp at each end. Use pliers to squeeze the clamps and remove the hose. Replace with new hose. I re-used the original clamps.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Tub to Pump Hose (Now subbed to Tub to Drain Pump Hose)

Part Number: PS2020911

$13.86
In Stock