extremely noisy operation

ApplianceAdmiral Dryer

Modellnc-8761A71

Level of DifficultyReally easy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Pliers
Nutdriver
Screw drivers

Paul From Daly City, CA

Jan 27, 2009

6 out of 7 people found this instruction helpful

unplugged unit, opened lid, removed 2 screws & door switch from front panel, removed front panel & drum.
Removed clips & washers from rear roller shafts, removed 2 screws (each) attaching rear roller shafts to rear of unit. Replaced rear roller shafts, thrust washers, rollers & clips. Removed clip from belt tensioner idler arm, replaced idler pulley wheel & clip.
pulled tensioner toward motor side and locked in place with broomstick. Placed new belt over drum & installed drum/belt into unit, engaging rear drum lip over new rear drum support rollers. Guided belt
over motor shaft and slowly released broomstick to
tension belt. Turned drum by hand to ckeck belt tracking. Reinstalled front panel & door switch, installed 2 screws holding front panel to case. Closed lid. Plugged unit in & tested for proper operation-OK.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Multi Rib Belt - 92-1/4"

Part Number: PS346995

$13.70
In Stock

Idler Pulley Wheel (Now subbed to Idler Pulley Wheel)

Part Number: PS2030893

$14.43
In Stock

Rear Drum Support Roller Kit (Now subbed to Rear Drum Support Roller Kit)

Part Number: PS2162268

$37.91
In Stock