Water level switch was continuously satisfied, washer would not fill, and would go into agitation immediately.

ApplianceWhirlpool Washer


Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of Appliance5 - 10 years

Tools Nutdriver
Screw drivers

Shirley From Council Bluffs, IA

Jan 23, 2009

5 out of 8 people found this instruction helpful

Removed the screws holding the control panel onto the washer. Removed the switch knob and then the switch (required unlocking a tab and then rotating the switch to remove). Unplugged the wiring connector and the water sensing tube. Replaced the switch in the reverse order and remounted the control panel. Test run proved the washer was working again.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Water Level Control Switch - 4 Level Rotary (Now subbed to Water Level Switch)

Part Number: PS3408118

In Stock