No cold fill

ApplianceMaytag Washer


Level of DifficultyEasy

Time to do repairLess than 15 mins

Age of Appliance5 - 10 years

Tools Nutdriver
Screw drivers

Gary From Chattanooga, TN

Jan 22, 2009

3 out of 3 people found this instruction helpful

I checked the internet and downloaded service manual. Diagnostics took me from the cold water valve solenoid through the wiring loom to the control board. Fix was to replace board. The board is located in the control panel at the top of the machine and has a number of wires connected by push on terminals, all the terminals are slightly differant apart from the relay connections so it is difficult to get it wrong, I needed to undo two nuts and the control panel hinged forward, the circuit board is fixed by two nuts. The machine is designed to be repaired from the front if you cannot access the back covers. It means taking the front panel off which is held by four screws and two nuts which is a bit fiddly but easy with a nut driver.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

USE WPL 22002917 (Now subbed to CNTRL-ELEC)

Part Number: PS2020701

In Stock