The button to open the door would not always work

ApplianceWhirlpool Microwave

Model

Level of DifficultyA Bit Difficult

Time to do repair15 - 30 mins

Age of ApplianceMore than 10 years

Tools Screw drivers

Steve From Madison, WI

Jan 21, 2009

1 out of 1 people found this instruction helpful

The microwave was a built in so I needed to remove five screws from the metal band around the frame, and two screws that attached the control panel to the microwave. After that I lifted the control panel up and out. The replacement of the button was easy once I released the clip on the defective one with a screw driver. The old springs were still good, and the new button slid right in. All works fine. The control panel also controls the built-in oven, so if I could not fix it it would have meant I had to buy a whole new combo oven Microwave. I was told it could not be repaired. Thanks to you I proved them wrong, and saved a couple thousand in the process. Not a bad investment for less than $10.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Push Button

Part Number: PS366898

$17.18
In Stock