we had very low water flow, during fill cycle on our washing machine

ApplianceMaytag Washer


Level of DifficultyEasy

Time to do repairLess than 15 mins

Age of Appliance1 - 4 years

Tools Nutdriver

Anthony From Gainesville, FL

Jan 20, 2009

2 out of 2 people found this instruction helpful

First I unplugged the washing machine and turned off the water. Located on the back of the machine there are 2-5/16 "screws that hold the top secure, removing these screws gave me access to the water mixing valve. One 1/4 " screw holds the valve in place to the back of the machine, removing this screw alowed me to remove the valve from the back of the washer. Then disconnecting the water lines and electrical lines from the valve assembly in my hand was easy, with a 5/16"nut driver for the water line hose under the washer lid. The electrical lines just un plug. Repeating these steps in reverse made this job easy. After fixing our washing machine we could not believe how much faster the tub filled up. This will probably save us some on electricity, it use to take about 20 minutes to fill the tank now its filling up in about 5 minutes. Thank you so much for your timely delivery and affordable pricing. I will recommend Parts Select to my family and friends for there future needs! Thank You Anthony

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

USE WPL 40107001 (Now subbed to Water Inlet Valve)

Part Number: PS2041302

In Stock