Washer would stop running during the wash cycle

ApplianceMaytag Washer


Level of DifficultyReally easy

Time to do repair15 - 30 mins

Age of Appliance1 - 4 years

Tools Nutdriver
Screw drivers

David From Mentor, OH

Jan 17, 2009

6 out of 7 people found this instruction helpful

1, Unplug unit from power outlet. 2, Removed 3 screws on the top back control console, 3, pushed bottom section back (standing in front) and tip top section foward, console then will lay flat on top of the washer, 4, remove wire connector, 5, remove 1/4 " screw lower left side, 6, lift locking tap up and slide timer to the left. 7, Set new timer in place and reverse the procedure starting with step 6.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Timer Knob Insert Cap

Part Number: PS2019693

In Stock

USE WPL 22003371 (Now subbed to Timer)

Part Number: PS2020976

In Stock