Idler pully seperated from bushing

ApplianceAmana Washer

ModelNAV5800AWW

Level of DifficultyDifficult

Time to do repairMore than 2 hours

Age of Appliance1 - 4 years

Tools Pliers
Nutdriver
Socket set

David From Raytown, MO

Jan 15, 2009

5 out of 6 people found this instruction helpful

first I unplugged the electrical plug then I removed the lower covet by taking out the 5/16 screws. I then took out the 5/16 screws that hold the top part of the front cover and removed it.
I then worked the belt off the aggitator pully and removed the hoses from the pump. I then used a 1/2 in soclet on long extension th remove the four bolts that hold the motor and pump assembly. I then worked the assembly out of the cabinate and using a long #20 torx bit I removed the pumfrom the housing. I removed the belt, then I removed the housing off the motor and replaced the Idler bracket with the idler pully. I then re-assembled it in the reverse of taking it apart. Works great with the new idler and belt.
David Hilton

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Thrust Washer

Part Number: PS333174

$4.46
In Stock

Retaining Ring (Now subbed to Retaining Ring)

Part Number: PS2025108

$2.70
In Stock

V-Style Spin and Agitate Belt - 28-3/4 inches long (Now subbed to V-Style Spin and Agitate Belt)

Part Number: PS2027741

$25.29
In Stock

USE WPL 27001028 (Now subbed to Idler Lever)

Part Number: PS2027756

$15.35
In Stock

Idler Pulley Wheel (Now subbed to Idler Pulley Wheel)

Part Number: PS2040929

$18.77
In Stock