noisy blower wheel

ApplianceCrosley Dryer

Modelcde22b8m

Level of DifficultyEasy

Time to do repair1- 2 hours

Age of Appliance1 - 4 years

Tools Pliers
Nutdriver
Screw drivers

Ernie From St Ignace, MI

Jan 15, 2009

6 out of 7 people found this instruction helpful

unplug dryer---pop the top up---remove 2-1/4 metal screws that attach front to sides---unclip door switch & wires-lift up on front & set it aside--locate blower housing-remove 6-7 1/4 & 5/16 head metal screws--tough part is i had to buy a snap ring plier to get snap ring off motor shaft--use regular pliers,remove spring clip from blo-wheel hub--wiggle & pull blo-wheel from shaft--befoe re-assembling,,vac out all areas inside dryer case-carful not to damage wires & heat element--when clean re-assemble in order removed--also when ordering parts,,my dryer is series 11 (first two digits in serial #)--parts list showed wheel for series 10 & another for series 12---per instructions from a very nice lady on the other end of the parts select phone,always select the lower series--i my case,series 10

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Blower Wheel - B/10 Models

Part Number: PS2030820

$36.59
In Stock