Dryer would make squealing noise when used

ApplianceWestinghouse Dryer

Model

Level of DifficultyEasy

Time to do repairMore than 2 hours

Age of Appliance1 - 4 years

Tools Screw drivers

THEODORE From INDIANAPOLIS, IN

Jan 14, 2009

4 out of 4 people found this instruction helpful

First I removed the top of dryer by prying upwards with a screw driver to pop the clips that hold it in place,the second thing I done was to remove to screws that held the front of dryer in place,these screws are located in side the cover half way down.once tha twas completed I remove the front and took it out side where I used a wire brush to remove the old felt at least what was left.onced cleaned I applied the new felt using the supplied high temp glue and then used clothes pins to clamp the felt in place and left sit over night .next morning I installed with ease and all was fixed. NO MORE NOISE:)

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

High Temperature Adhesive

Part Number: PS474458

$25.23
In Stock

Lower Front Felt Seal with Adhesive

Part Number: PS832645

$13.81
In Stock

Upper Front Felt Seal

Part Number: PS975866

$27.87
In Stock