The dryer would not cool down in the permenant press cycle or any other cycle.

ApplianceMaytag Dryer

Model9806

Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of ApplianceMore than 10 years

Tools Pliers
Nutdriver
Screw drivers

george From camden, SC

Aug 29, 2007

9 out of 12 people found this instruction helpful

Pull the electric plug. With a nut driver and phillips screw driver remove two bolts and three screws on the rear access plate. Gently pull the knob from the front pannel and with the nut driver remove the two bolts under the knob. The timer is now loose from the drver. Match the wire plug codes on the old and new timers. Remove one wire at a time from the old timer with pliers and plug it onto the new timer on the same coded pin. Slide the timer back into the pannel and replace the two bolts that hold it. Replace the knob. Replace the three screws and two bolts holding the back pannel. Plug the electric cord back into the wall socket.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

USE WPL 33001730 (Now subbed to Timer)

Part Number: PS2035560

$101.43
In Stock