replace charcoal filter

ApplianceGeneral Electric Microwave

Modelspacemaker2.0

Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of Appliance1 - 4 years

Tools Screw drivers

Preeti From Oakland, CA

Jan 13, 2009

28 out of 34 people found this instruction helpful

there are two screws on the top near the vent. Unscrew the two and push the vent grill/cover to the left. It slides out easily. place the charcoal filter in the exhaust slot. there is no groove/slit for it as per manual, it just sits there (almost like an afterthought in design. Prop the bottom of the filter on the stubs on the lower edge of the exhaust mouth. Slide the grill/cover back and 'click' it in. put in screws. Note, since you've opened the grill/cover you might as well wipe the grease off. I used kitchen cleaner on a paper towel.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Charcoal Filter

Part Number: PS951943

$13.89
In Stock