Our dryer was making a loud sound similar to a NYC subway train

ApplianceAmana Dryer

Model

Level of DifficultyReally easy

Time to do repair30 - 60 mins

Age of Appliance5 - 10 years

Tools Pliers
Screw drivers
Socket set

John From Tinton Falls, NJ

Jan 10, 2009

3 out of 3 people found this instruction helpful

Removed all of the front outer bolts holding in the lower plate, front door assembly, drum outer frame and drum. While removing the outer sheel there are colored wire connections that activate the linterior light and door sensors in which I marked the interior sheel with a marker so I knew which wire went where. Before removing the drum I drew a sketch on how the belt is ran thru the pullys and around the drum, so I would have no problem reinstaLLING IT.The rooler bracket was easily removed with a socket wrench and the retaining wring was pried with a pliers. Reinstallation of the shaft, roller and ring were as simple as removal. I then cleaned the entire interior and lint basket for optimal performance. The most difficult part is pulling the belt back around the drum, but still not very difficult. Finally I reattached nall removed parts as they were removed and I now have a like new dryer for about $20.00 vs, buying anew one or repair fees costing Hundred$ OF DOLLERS.
Thanks Partsselect.com Again!

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Retaining Ring (Now subbed to Retaining Ring)

Part Number: PS2025108

$2.70
In Stock

Drum Support Roller - for square ported models (Now subbed to Drum Support Roller)

Part Number: PS2039408

$7.64
In Stock

Roller Bracket and Shaft Assembly (Now subbed to Roller Bracket and Shaft Assembly)

Part Number: PS2041342

$19.23
In Stock