Wash Cycle would not complete (would not drain)

ApplianceMaytag Washer


Level of DifficultyReally easy

Time to do repair15 - 30 mins

Age of ApplianceMore than 10 years

Tools Screw drivers
Socket set

Matthew From Columbus, OH

Aug 28, 2007

18 out of 18 people found this instruction helpful

PROBLEM: The washing machine would not go through the entire wash cycle. It would stop at the rinse cycle and the tub would not drain.

FIX: So easy, my wife made the repair while I was out of town. (1) Remove the two (of four) inner most Philips head screws to allow the control panel to swing down. (2) Pry off the cover on the cycle select knob with a flat head screw driver to allow removal the clip that holds the dial to the timer. (3) Pull off cycle select knob, cover, and spring, (4) Remove two bolts that hold the time to the control panel. (5) Remove two electrical connections from the timer. (5) Repeat steps in reverse order to install the new timer.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Timer (Now subbed to Timer)

Part Number: PS2019463

In Stock