ApplianceGeneral Electric Range
Level of DifficultyA Bit Difficult
Time to do repair15 - 30 mins
Age of Appliance5 - 10 years
Dwight From Houston, TX
Jan 08, 2009
1 out of 1 people found this instruction helpful
I was able to access the burner and igniter by removing the broiler drawer. The flame guard was removed with a nut driver and the old igniter with a phillips screwdriver.
The electrical wires had to be spliced into the old igniter wires as they did not come with the factory connectors. However sire nuts were supplied.
After replacement of the igniter with the new one .. it would glow and about a minute later the gas would come on. However the gas from the burner did not light. I had to adjust the bracket closer to the burner to correct the issue.
Note: The igniter is wired in series with the gas valve. This means that it will continue to glow even after the burner lights durning oven operation.
|Part Photo||Part Description||Price||Availability
Part Number: PS243425