Agitator would not rotate properly due to worn cogs

ApplianceWhirlpool Washer

Model

Level of DifficultyReally easy

Time to do repair15 - 30 mins

Age of ApplianceMore than 10 years

Tools Socket set

luis From peoria, AZ

Dec 25, 2008

21 out of 696 people found this instruction helpful

Removed softener container on agitator then the round cover under it to access the agitator bolt. Used socket wrench with extension to remove bolt. I then lifted the top half of agitator out of the washer and dumped cog housing. Replaced cogs with new ones (they're convex and fit in slots in the housing) and then placed the housing back in the agitator while aligning the holes on the cog housing with the tabs on the agitator.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

WASHER

Part Number: PS350496

$3.96
In Stock

Thrust Spacer

Part Number: PS350853

$3.96
In Stock

Agitator Directional Cogs

Part Number: PS388034

$3.46
In Stock