ApplianceMagic Chef Washer
Level of DifficultyReally easy
Time to do repairLess than 15 mins
Age of ApplianceMore than 10 years
1 out of 1 people found this instruction helpful
1. Remove 1 screw holding each of 2 Hinges - use T15 driver. 2. Push tub to one side to get access to each screw from underside. 3. remove & replace broken Hinge Pin from Lid with T15 driver. 4. Drive broken pin out of the Hinge with a punch & hammer. 5. Install new Hinge Pin to Lid. 6. Add a little Vaseline to Hinge Pin & slide Hinge Pin into Hinge. 7. Line up Hinges to holes & re-install both Hinges with Lid. Have somebody help hold the Lid in a slight angle will make re-installation easier.
Were these instructions helpful?
Part Number: PS2037923