Overflowing washer

ApplianceGeneral Electric Washer

Model

Level of DifficultyReally easy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Pliers
Nutdriver
Screw drivers

Paul From Perrysburg, OH

Dec 18, 2008

5 out of 7 people found this instruction helpful

Unplugged the washer and unscrewed the hot and cold filler hoses from the back of the machine. Removed the 6 screws holding the top together. Unscrewed the 2 water valve mounting screws. Pulled off the electrical wires from the leads. Unclipped the water feed hose clip. Reattached everything to the new water valve in reverse order. Put the screws holding the top panel in place back in.

For good measure, I also replaced the drain hose since I had noticed a little leakage there. Two screws and a little twisting and pushing was all that took.

Then I hooked everything back up and it worked like a charm. Finally, I went out to dinner with my wife on the money I saved!

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Drain Hose Clip

Part Number: PS270508

$3.00
In Stock

Drain Hose Extension - 4 1/2' Long

Part Number: PS890597

$9.75
In Stock

Dual Water Inlet Valve

Part Number: PS1155105

$40.51
In Stock