Burners were 50 years old, yes 50. They still worked but were beginning to show the use that they have had over the years.

ApplianceGeneral Electric Range

Model

Level of DifficultyReally easy

Time to do repair15 - 30 mins

Age of ApplianceMore than 10 years

Tools Nutdriver
Screw drivers

Deborah From Streator, IL

Dec 16, 2008

3 out of 3 people found this instruction helpful

I did the repairs by first shutting down the power and then checking with a tic tester to make sure power was off. Removed one burner at a time by unscrewing the holding screw on the hinge and then removed the ceramic insulator cover and then disconnected the wiring. I drew a schematic for the 3 wire leads (240 volts). Unscrewed them and removed the burner. Cleaned stove top, put burner back in reverse order. Very easy project. Stove top looks as good as it did when it was new.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Tilt Lock Hinge Mounted Surface Burner Kit - 6"

Part Number: PS244042

$29.16
In Stock

Tilt-Lock Hinge-Mounted Surface Burner - 8"

Part Number: PS244048

$44.02
In Stock

Trim Ring - 6"

Part Number: PS244475

$2.92
In Stock