Surface Element contacts when they were insert into the Terminal Block became burned up they were not making any contact to heat up.

ApplianceHotpoint Range

Model

Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of ApplianceMore than 10 years

Tools Screw drivers

Sean From Anaheim, CA

Dec 14, 2008

1 out of 1 people found this instruction helpful

First I removed the one screw that hold the terminal block in place. I then pulled the terminal block out about 3 inches and unscrewed the two screws and disconnected the two wires. Then I got the new terminal block and re-attached the two wires with the two screws. Then I screwed the terminal blocked with the one screw and then I inserted the 8" Surface Element and I turned it on and it heated up very quickly. It works better than it has in many years.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Terminal Block Assembly

Part Number: PS232617

$9.60
In Stock

Surface Element - 8"

Part Number: PS244001

$28.39
In Stock