Washing Machine Tub would not drain

ApplianceMaytag Washer

Model

Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of ApplianceMore than 10 years

Tools Screw drivers

CHRISTOPHER From BOCA RATON, FL

Dec 02, 2008

3 out of 3 people found this instruction helpful

First I removed the two screws that held the front panel in place. Then I determined that the belt for the pump had fallen off because the drive belt was worn (and inverted) and a piece was hanging off and causing the pump belt to slip off the motor. I replaced the belt for the pump (Temporarily) to allow the tub to drain.

I replaced both belts with new belts and returned the front panel. The process took 15 minutes due to the necessity of explaining the proper use of tools to a neighbor child and allowing him to assist (required for the completion of one of his Cub Scout requirements).

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Pump Belt - 40.5 inches long (Now subbed to Pump Belt)

Part Number: PS2018556

$16.64
In Stock

Drive Belt - 41.5 inches long (Now subbed to Drive Belt)

Part Number: PS2018557

$14.40
In Stock