Washer quit cycling through all the wash and rinse steps

First removed two screws holding control panel,once those are out, you remove the center plastic on the selector button,remove the metal retainer and take the button off the outside of the panel ( be careful of the spring behind the button) Next there is two bolts screwed from the front that hold the timer in place,remove these and the timer is removed, unplug the electrical wire plug from timer and you have it . Just reverse the steps and your all done!!! easy repair! Maytag repair man wanted over 100.00 just in labor! I did it in less than 30 minute's and that was just trying to find some tools.