Standing water after cycle

ApplianceGeneral Electric Dishwasher


Level of DifficultyEasy

Time to do repair30 - 60 mins

Age of Appliance5 - 10 years

Tools Wrench set
Screw drivers

William From Broomfield, CO

Dec 02, 2008

4 out of 5 people found this instruction helpful

Easy. I removed the dishwasher and all water from inside. After laying the dishwasher on floor, the valve flapper was installed using a pair of pliers. I then set the unit upright, and removed the rear screen from the inside back of the unit. This part has 4 nut screws, and runs the width of the unit. Under the screen, the Piston and Nut Assembly for Check Value simply unscrewed. When I looked at it, I knew this would do the trick. I simply screwed the new one in, and re-installed the dishwasher. After the first cycle, I smiled thinking of all the $$$ I saved.

Parts Select is great :)

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Valve Flapper (Now subbed to Check Valve Flapper)

Part Number: PS258167

In Stock

Lower Spray Arm Assembly

Part Number: PS260538

In Stock

Piston and Nut Assembly

Part Number: PS260690

In Stock