Front Frame was Cracked at bottom and the handle was Cracked

ApplianceGeneral Electric Microwave

ModelJVM1650WH05

Level of DifficultyA Bit Difficult

Time to do repair15 - 30 mins

Age of Appliance1 - 4 years

Tools Screw drivers

James From Park Ridge, IL

Dec 01, 2008

17 out of 21 people found this instruction helpful

First removed the upper grill, second lifted the door off of the hinge pins; layed the door inside up on a towel and with the putty knife I released the tabs holding the inner frame to the door assembly. Now I removed the two screws that hold the handle to the inner frame than using the putty knife went around the and released the tabs holdind the front frame to the center glass assembly. Once the front frame was removed two more screws can be removed to completely remove the handle fron the front frame. I now assembled the new handle to the new front frame and reversed the above process by snapping the Glass assembly very carefully into the front frame sssembly. I than put the two screws back in that secure the handle and snapped the iner frame back in. I now rehung the door and reinstalled the upper grill. Note removal and assembly of the front frame to the inner glass assembly is a little tricky so take not of all of the tabs and also how the glass is caught top and bottom to the front frame.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Outer Door Frame

Part Number: PS651571

$70.70
In Stock

Door Handle

Part Number: PS952981

$39.09
In Stock