Ice maker wouldn't change from crushed to cubed ice

ApplianceFrigidaire Refrigerator

Model

Level of DifficultyEasy

Time to do repair30 - 60 mins

Age of Appliance1 - 4 years

Tools Nutdriver
Screw drivers

robert From sioux falls, SD

Nov 30, 2008

25 out of 31 people found this instruction helpful

First I pulled the ice tray out so I could see the solenoid housing/ice tray support(1 unit). Below the ice tray there are 2 screws that hold the solenoid housing/ice tray support. After removing those the assembly lifts up so you can see the wiring harness to disconnect. I pulled it out and removed the 2 screws to open it up. There is 2 screws holding the solenoid in place and one ground wire. This was an easy fix and I know I saved a lot of money.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Cube/Crushed Solenoid with Arm (Now subbed to SOLENOID ASSY)

Part Number: PS8691994

$42.44
In Stock