The dryer wouldn't heat up.

ApplianceRoper Dryer

Model

Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Nutdriver
Screw drivers
Socket set

Chris From Horseheads, NY

Nov 26, 2008

7 out of 12 people found this instruction helpful

I unplugged the appliance and turned off the gas supply. I removed the exhaust hose by loosening the clamp with a nutdriver. I removed the back panel screws with a nutdriver and removed the panel. I pulled the wire connectors off of the thermostat and thermal fuse. I removed both parts using a screwdriver. The thermostat terminals were slightly different, but the new style terminal ends came with the thermostat. I cut the old style terminal ends off of the old wiring with wire cutters. I stripped the wires and crimped new ends on the wires. I replaced the parts and wiring in the reverse order of removal. I replaced the back panel and exhaust hose. I turned on the gas supply and plugged in the dryer. I turned the dryer on to test it. It worked well. No problem!

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

High Limit Thermostat - Limit: 205-40

Part Number: PS334124

$26.46
In Stock

Thermal Fuse

Part Number: PS345113

$12.52
In Stock