Washer would stop on its own. Had to lift lid to restart

ApplianceWhirlpool Washer

Model

Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of Appliance5 - 10 years

Tools Screw drivers
Socket set

Henry From Jacksonville, NC

Nov 23, 2008

1 out of 1 people found this instruction helpful

Make sure the unit is unplugged. I removed the screws that hold the control panel in place. Unplugge the lid switch from the panel. Removed the two large brass clips with screwdriver. This allow me to remove the washer body by tilting it forward. I removed the hardness from the clips, disconnect the ground and remove the two screws that held the switch in place. Simply reverse the procedeures with the new switch and I was done.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Lid Switch Assembly with Leads

Part Number: PS350434

$31.00
In Stock