Oven wouldn't heat after a self clean mode.

ApplianceWhirlpool Range


Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of Appliance5 - 10 years

Tools Screw drivers

Robert From Enola, AR

Nov 21, 2008

2 out of 2 people found this instruction helpful

After turning of the breaker for the oven, I pulled out the oven, removed the back panel. The High-Temp thermal cutoff was attached to 2 wires, which I unplugged, and then removed the cutoff by removing two screws. I then replaced the part in reverse order, pushed the oven back into the cabinet, and turned the breaker back on.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

USE WPL 9759242 (Now subbed to Thermostat)

Part Number: PS974726

In Stock