rf burner was not working

ApplianceGibson Range

Model

Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of Appliance1 - 4 years

Tools Screw drivers

Neil From Jessup, PA

Nov 13, 2008

25 out of 33 people found this instruction helpful

First I removed 2 screws that held the stove top in place. Raised the stove top and support it. Then, I removed the hold down spring for the burner and removed three wires from the old burner. I found that the connector on the white wire was spread open too much so I crimped it closed for a better fit on the terminal. I reattached the three wires, put the hold down spring back in place, lowered the stove top and installed the 2 screws. JOB DONE

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Radiant Burner Element with Limiter - 8" - 2200W

Part Number: PS436591

$167.51
In Stock