No heat

ApplianceMaytag Dryer

ModelMDE9557AYW

Level of DifficultyReally easy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Nutdriver
Screw drivers

BRYAN From NORTHAMPTON, PA

Nov 12, 2008

3 out of 4 people found this instruction helpful

Verified timer as faulty with use of schematic and ohmmeter, Element, motor switch, and thermostats within specs, no continuity on pink/black timer leads on any cycle.
First remove the back cover consisting of three phillips screws and two 1/4" hex head sheet metal screws. Then pull timer knob straight off and subsequently remove the two 1/4 " hex head self-tapping machine screws. Then remove each spade terminal, one at a time, connecting them to the terminals on the new timer. Note- the timer has the wire colors imprinted on the body if you do not replace one at a time.
Reverse the above procedure for assembly, noting the position of the timer knob will align with the "keyed" shaft.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

USE WPL 33001634 (Now subbed to Timer)

Part Number: PS2035490

$113.39
In Stock