No Heat from the dryer

ApplianceKenmore Dryer

Model

Level of DifficultyReally easy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Nutdriver

Steve From Oldsmar, FL

Nov 06, 2008

1 out of 1 people found this instruction helpful

Remove the plug from the wall outlet. Leaned the dryer over on its front. Removed the back panel screws and back panel. Disconnected the wires from the side of the heating element and removed the 2 screws holding the metal housing and pulled the heater housing away from the main housing. Removed the electrical component for use on the new element. Installed the component on the new housing and attached the housing to the main housing. Reconnected the wires, attached the back panel with screws. Set the dryer upright and plugged in the dryer cord into the wall outlet, turned on the dryer and the heat started flowing.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Heating Element - 240V 5400W

Part Number: PS334313

$44.70
In Stock