two igniters didnt function and it continued to spark after the gas ignited.

ApplianceJenn-Air Range


Level of DifficultyA Bit Difficult

Time to do repair1- 2 hours

Age of Appliance1 - 4 years

Tools Pliers
Screw drivers

nhung From chesapeake, VA

Oct 25, 2008

6 out of 8 people found this instruction helpful

Well, after I finally got the parts, the repair was easier than anticipated. You deffinitely want to lift the unit out to replace the spark module and swap over one wire at a time so you dont forget where they go, (important on a gas stove) When I pulled out the old unit I found it was just jammed in there when constructed, I expected more from Jenn-air, and the plastic casing was broke and pulled apart. Surprised it lasted this long. Also three of the ceramic insulators on the ignitors were broke or cracked. But over all the unit was fairly simple to repair if you take your time and practice safety. Remember, you are working with gas and electicity, and use soapy water to check your connection when you reconnect the gas line. Dont try to work on it still hooked up and in its mount . Disconnect it and lift it out.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

USE WPL 74009337 (Now subbed to Igniter Screw)

Part Number: PS393669

In Stock

USE WPL 74009336 (Now subbed to Burner Electrode)

Part Number: PS2086773

In Stock

USE WPL 8286828 (Now subbed to Spark Module)

Part Number: PS2325099

In Stock