Leaking door

After reading repair stories on this website, I decided to order the grommet as well as the seal for my dishwasher door. The seal was easy, just pull the old one out and push the new one in. Make sure the ends were even and that was done. Next came the grommet. 7 screws and I had the plastic off of the door. Then you just flip the plastic panel over and be careful of the wires.(I didn't remove them) Remove two more screws and the latch came out. Just tug the old grommet off and push the new one into place. Line it back up and replace the bolts. Flip the plastic back over and put the other 7 screws back in and you are ready to clean again. While I was in there I took a little extra time to clean some of the buildup out of the sealing surfaces. No more leaks!