Noisey water shut-off after fill cycles

ApplianceMaytag Washer

ModelA882

Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of ApplianceMore than 10 years

Tools Pliers
Screw drivers
Socket set

Brian From Ashburn, VA

Oct 21, 2008

1 out of 1 people found this instruction helpful

I unscrewed the bottom two front phillip screws. Lifted the front panel at a right angle then popped off downward. Used a 3/8 socket to unscrew the two screws inside in the upfront corners holding the top to the sides. Pulled off the top bleach line.
Lifted the lid upward until it rested on the back wall. Unscrewed the water fill tube connected to the top side panel which to reach the inlet valve area. wrote down which color of the four wires went where. Unscrewed the back plate and disconnected the valve wires. Reversed procedure for installation. Cleaned other parts while I was in there. Installation went quick and smooth.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Hose Clamp

Part Number: PS380193

$2.70
In Stock

Water Inlet Valve (Now subbed to Water Inlet Valve)

Part Number: PS1583805

$27.52
In Stock