The plastic tubing which attached to the upper spray jets was ripped apart (fairly normal wear and tear)

ApplianceKitchenAid Dishwasher

Model

Level of DifficultyEasy

Time to do repairLess than 15 mins

Age of Appliance5 - 10 years

Tools Screw drivers

Ryan From Boca Raton, FL

Aug 18, 2007

1 out of 2 people found this instruction helpful

I removed the screw from the top dishwasher tray and then proceeded to remove the screw undernearth the spray jets.

There were several parts that needed to be removed after the screws were taken off. They basically all came apart fairly easily.

Some parts I needed to keep and re-use, but most of them were replaced with the new Spray arm kit.

The kit included a new spray jet and the tubing that I needed to orginally replace. All the new parts were installed, using some of the old parts to complete the installation. I basically just remembered how everything was disassembled so that I could re-assemble the new parts. Otherwise, I would have had a hard time, since there were no step-by-step instructions.

It was fairly easy to figure things out, as most parts fit together nicely. Then I could use the 2 screws to tighten everything (which was much easier said than done).

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Middle Spray Arm Kit

Part Number: PS382824

$26.57
In Stock