Washer wouldn't advance to next operation of cycle

ApplianceMaytag Washer

Model

Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of Appliance1 - 4 years

Tools Nutdriver
Screw drivers

David From Holcombe, WI

Oct 14, 2008

8 out of 8 people found this instruction helpful

First I unplugged the washer from the power supply. I then removed the cover from the timer selector, by gently prying with a flat screw driver. I next removed the small plastic pin in the center of the selector with the screw driver. The remaining part of the seletor can the be pulled from the timer shaft. I then removed 3 phillips head screws from the top of the rear control panel. The bottom of the panel is secured with 3 1/4" screws, which I removed with a nut driver. The panel can then be tipped towards the front of the machine to allow access to the timer. I unplugged the electrical plug and removed the screw which holds the timer. Next slide the timer to the left and lift it out. Reverse the procedure and your ready to test youur handy work.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Timer - 120V 60Hz

Part Number: PS2027829

$127.68
In Stock