The Amana oven & broiler igniters failed after 7+ years of service

Broiler Igniter:

Disconnected stove from electricity

Removed the two screws that hold the broiler igniter assembly

Pulled asembly out to expose ceramic wire nuts

Removed ceramic wire nuts and save them

Removed broiler igniter assembly (broiler igniter & brolier mounting bracket are assembled together)

Loosened screws/nuts that hold the broiler igniter to the brolier mounting bracket

Remove old broiler igniter

Carefully inserted new brolier igniter into the broiler igniter bracket

Place the brolier igniter bracket into position. Make sure you look at the diagram provided so the position is correct. There is a "up" & "down" side to the broiler igniter

Tightened screws & bolts on broiler igniter bracket

Reconnected the ceramic wire nuts

Inserted two mounting screws and tightened

Finished.

Oven Igniter:

Removed oven door

Removed bottom oven drawer

Removed nut that holds heat shield/disperser in place

Removedheat shield/disperser

Removed all oven tray screws

removed oven burner

disconnected oven igniter

disconneted oven igniter assembly

inserted new oven igniter

reassembled