Water dispenser did not work and icemaker fill inlet froze causing incoming water to spill over into ice bin

ApplianceKenmore Refrigerator

Model1069552820

Level of DifficultyEasy

Time to do repair30 - 60 mins

Age of ApplianceMore than 10 years

Tools Wrench set
Pliers
Nutdriver
Screw drivers
Socket set

Timothy From College Station, TX

Oct 08, 2008

2 out of 2 people found this instruction helpful

The repair to replace the Dispenser Water Inlet Valve located at the lower right rear of the refrigerator went essentially as described in other reported replacements...with one exception. The fitting to attach the water inlet line to the original Dispenser Valve was nylon and larger than the metal male compression fitting attachment on the replacement valve. The two discharge fittings on the new valve were plastic and identical in size as the fittings on the original valve. These two lines were easily moved and installed on the new valve. Fortunately, I maintain some inventory of compression fittings and had on hand the proper size brass nut, insert, and compression sleeve for the 1/4" nylon water line from the wall. the electrical connections were easily installed.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Icemaker and Water Dispenser Dual Inlet Valve

Part Number: PS328747

$59.02
In Stock